ASTM A995/995M, Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts1
The duplex stainless steels offer a combination of enhanced mechanical properties and corrosion resistance when properly balanced in composition and properly heat treated. Ferrite levels are not specified, but these grades will develop a range of approximately 30 to 60 % ferrite with the balance austenite. It is the responsibility of the purchaser to determine which grade shall be furnished depending on design and
service conditions, mechanical properties, and corrosionresistant characteristics.
ASTM_A995_A995M Castings, Austenitic-Ferritic (Duplex) Stainless Steel.pdf,
Astm a995/9945M Duplex Stainless Steel Property
All standards from internet, only for study usage. For further details pls contact with us through [email protected]
Duplex Stainless Steel CD6MN (3A,UNS J93371)
Duplex Stainless Steel CD6MN (3A, UNS J93371) in ASTM A995 and ASTM A890
Duplex Stainless Steel CD3MCuN (1C, UNI J93373)
Duplex Stainless Steel CD3MCuN (UNS J93373) in ASTM A890
Duplex Stainless Steel CD4MCuN (UNS J93372)
Duplex Stainless Steel CD4MCuN (UNS J93372) in ASTM A890 and ASTM A995
Duplex Stainless Steel CD3MWCuN (6A)
Duplex Stainless Steel CD3MWCuN (UNS J933380, 6A) in ASTM A351, ASTM A890 and ASTM A995 standard
Duplex Stainless Steel CE8MN (2A)
Duplex Stainless Steel CE8MN (2A) in standard of ASTM A890, ASTM A950, ASTM A351
Duplex Stainless Steel GX2CrNiMoN22-5-3(EN 1.4470)
Duplex Stainless Steel GX2CrNiMoN22-5-3(EN 1.4470) in EN 10283 and EN 10213 and ISO 11972, X2CrNiMoN22-5-3 (EN 1.4462) is similar grade in EN 10088-3
Duplex Stainless Steel CE3MN (SS2507)
Super Duplex Stainless Steel CE3MN (SS2507) in ASTM A890/A895 standard for casting purpose
CD4MCu-Duplex Stainless Steel-Casting Material
Duplex Stainless Steel CD4MCu (UNS J93370) in ASMT A351 and ASTM A890
I would like to know whether therre is a casting equivalent for A192 Gr. F92 ASTM material specification. If so kindly indicate your capability to supply the same.
are u sure it’s ASTM A192?
It should be astm a185 F92， its alloy steel. not stainless steel.